TI Filters by Patriot Antenna Systems

Terrestrial Interference Filters

C-Band Filters
FLT-MFC-13961	C-Band TI Filter, 3.7 – 4.2Ghz This waveguide bandpass filter virtually eliminates interference caused by navigational communications (radar) of commercial and military aircraft, as well as costal and marine vessels operating at frequencies above and below the C band. Installed between the LNB and feedhorn. This unit is ideal for multifeed applications. Lightweight and low insertion loss. Patriot List Price: $380 Printable PDF

FLT-MFC-7893D-3442	C-Band TI Filter, 3.4 – 4.2Ghz The FLT-MFC-7893D-3442 Extended C-Band “International” Filter can be used globally where there is access to the wider 3.4 – 4.2GHz satellite band. It virtually eliminates all out of band interference such as military radar. Installed between the LNB and feedhorn. This unit is ideal for multifeed applications. Lightweight and low insertion loss. Patriot List Price: $490 Printable PDF

FLT-MFC-11383	C-Band TI Filter, 3.6 – 4.2Ghz The FLT-MFC-11383 is also an Extended C-Band “International” Filter. It operates over the 3.6 – 4.2GHz satellite band. The filter offers super-selectivity by virtually eliminating all out of band interference such as military radar. Installed between the LNB and feedhorn. This unit is ideal for multifeed applications. Lightweight and low insertion loss. Patriot List Price: $490 Printable PDF

Ku-Band Filters
FLT-MFC-9349	Ku-Band Filter Used to isolate the receive and transmit bands, providing suppression of any interference these bands may cause each other. Installed between the LNB and feedhorn. Low insertion loss. Patriot List Price: $399

Specifications subject to change without notice

Related Equipment

LNBs

Feeds

Satellite Cable

Quick Facts

The FLT-MFC-13961 works well with multifeed applications

Filters are in stock!

Get Acrobat Reader

Acrobat Reader is required to open all PDF files.

If you do not have Acrobat Reader installed on your computer, you can get it here for free.

Back to RF Components Home