Satellite Antenna Jog Controller

The RC3050 is a micro controller based jog controller designed for use with mobile satellite antennas. Printer-friendly PDF

RC3050A Features

Intuitive user interface based on a 2 by 16 liquid crystal display and an eight key membrane keypad. In the controller’s normal operating mode the current antenna position sensor readings for all three axis may be viewed simultaneously. The RC3050 enclosure is designed for rack mounting (2 rack units high).

Available in two basic versions. The RC3000A supports low voltage, high current DC motors on the azimuth, elevation, and polarization axis. The RC3000B supports 90/180 VDC azimuth and elevation motors and a low voltage, low current DC motor for polarization control.

The RC3050 may be optionally ordered with software support for automatic stow/un-stow operation.

The RC3050 supports an optional hand held jog controller. The hand held jog controller attaches to the RC3050 via a 20 foot cable and allows the operator to jog the antenna about all axis and view limit switch indications.

*PDF Cut Sheet of the RCI-3000A

*PDF the RCI-3050A