 |
|
|
|
|
click image to enlarge |
Patriot 1.2
Meter
Ku-Band
Cost Efficient
Offset
Antenna System |
Manual
Spec sheet |
| RF
Specifications |
Ku-Band |
| Frequency |
10.75-12.75 GHz |
| Antenna Gain |
42.20 - 42.90 dBi |
| Rx 3 dB Beamwidth |
1.4 dBi |
| Antenna Noise @ 30°EL |
24 K |
| Typical G/T (Midband) |
22.2 dB/K |
| Feed Interface |
WR 75 |
|
Mechanical Specifications |
|
| F/D Ratio |
.5 |
| Focal Distance |
23.6 in/60.0 cm |
| Offset Angle |
27.7° |
| Small Axis Diameter |
120 cm |
| Azimuth Alignment |
0° - 360° |
| Elevation Alignment |
15° - 70° |
| Boxed
Weight |
108 lbs (includes skid) |
| Crate Dimensions |
56x56x19 in |
| Units per 40 ft Container |
700 Bulk Packed |
| Feed Holder |
DBS/26~40 mm |
| Mount Material |
Galvanized
Steel |
| Mount Type |
Az-El |
|
Environmental Specifications |
|
| Wind Load |
Operational |
50 mph |
|
Temperature |
Operational |
-30° to 140°F
-30° to 60°C |
| Survival |
-60° to 180°F
-51° to 82°C |
| Radial Ice |
Survival |
1 in or
1/2 in + 60mph |
| Shock & Vibration |
As occurred during on
shipment of air, truck or rail. |
Mounting Options
Specifications and Weights & Dims subject
to change without notice
|
|
|
Related Components |
 coming soon |
|
|
Features |
DBS or Feed Applications
Single Piece Reflector
Reinforced Outer Rim
Galvanized Reflector with
Poly-Powder Coat Finish
Dacrotized Hardware |
|
|
Description |
Patriot Antennas have
superior surface accuracy. The 1.2, 1.5, and 1.8 meter
reflectors are precision single piece reflectors produced in high
volume utilizing precision draw dies. Patriot reflectors are
randomly checked for R.M.S. accuracy with dial indicator check
fixtures. All mounting holes are die pierced for uniform
accuracy. The feed boom assembly is matched for either DBS or
linear LNBF applications. The dish structures have been wind
tunnel tested by Aeronautical Research Laboratories (ARL).
Patriot Antennas have
superior corrosion resistance. All reflector and mount
parts are produced from dual sided galvanized steel. Reflector
and mount parts are sealed and powder coated with U.V. inhibited
polyester-based finishes that are baked onto the metal.
Mounting hardware is treated with DACROTIZED and salt spray tested.
Patriot Antennas are
designed to weather the storm. All of the antenna mounts
are designed to withstand wind forces in excess of 100 mph.
Patriot metal antennas will uniformly expand and contract with
temperature changes. |
|
|
Weights & Dims |
|
Coming Soon |
|
|
|
