Home Contact About Patriot Policies
 .90 Meter PTX Offset Antenna
 

Home
Antennas
Flyaway Antennas
Military
Mounts
RF & Components
Alliances
Directions
Distributors
Employment
FAQs
Feedback
Manuals
News
Photo Gallery
Services
Shipping
Tech Support
Tools
Trade Shows
Type-Approvals

 

 

 

 

DBS DTH Patriot satellite dish
click image to enlarge

Patriot .90 Meter Ku-Band
Cost Efficient

Offset Antenna System
Manual

Printable Spec Sheet

 
RF Specifications  
Receive Frequency Range 10.95 - 12.75 GHz
Midband Gain 39.8 dBi
Apeture Efficiency 72%
3dB Beamwidth 1.8º
Cross-Pol Isolation 35.6 dB on Axis
First Sidelobe Level -23.4 dB
VSWR 1:.3:1 Max.
Noise Temperature 27K @ 10°
 
Mechanical Specifications  
F/D Ratio 0.65
Reflector Optics Offset
Offset Angle 21º
Surface Acuracy ±0.01”
Mounting Options Universal, NPRM, Pole
Elevation Adjustments 15º-70º
Azmuth Adjustments 360º
 
Environmental Specifications
Wind Load Operational  60 mph
Finish Powder-coat
NOTE: Determine the desired elevation angle required for the satellite of choice.  The standard Az-el bracket is capable of two ranges of adjustment:
25 to 55°
and 10 to 45°.

If the desired elevation is between 50 to 85° an optional Az-El bracket must be used.

Mounting Options

Non-Penetrating Mount Ground Mount Wall Mount

 

Specifications and Weights & Dims subject to change without notice

Related Components
coming soon
Features
Folding, Adjustable Feed Arm

Ka and Ku-Band Applications

Multiple Satellite Capable

UPS Shippable
Description
Patriot Antennas have superior surface accuracy.  The .60, .76, .90 and 1.1 meter reflectors are precision single piece reflectors produced in high volume utilizing precision draw dies.  Patriot reflectors are randomly checked for R.M.S. accuracy with dial indicator check fixtures.  All mounting holes are die pierced for uniform accuracy.  The feed boom assembly is matched for either DBS or linear LNBF applications.  The dish structures have been wind tunnel tested by Aeronautical Research Laboratories (ARL).

Patriot Antennas have superior corrosion resistance.  All reflector and mount parts are produced from dual sided galvanized steel.  Reflector and mount parts are sealed and powder coated with U.V. inhibited polyester-based finishes that are baked onto the metal.  Mounting hardware is treated with DACROTIZED and salt spray tested.

Patriot Antennas are designed to weather the storm.  All of the antenna mounts are designed to withstand wind forces in excess of 100 mph.  Patriot metal antennas will uniformly expand and contract with temperature changes.
Weights & Dims
Coming Soon


 
Copyright 2004 Patriot Antenna Systems. All rights reserved.