NPR Mounts

Non-Penetrating Mounts for Any Antenna Application
These mounts work for Patriot as well as Other Manufacturer's Antennas

2, 2-3/8, and 3 inch NPRM
Patriot Non-penetrating mounts are designed to mount antennas onto existing roof structures without penetrating or altering the roof. NPR’s are held in place with ballast which varies with antenna elevation and antenna size. Pipe Sizes: 2 in (51mm) • 2-3/8 in (60mm) • 3 in (75mm) Additional Double Tray Option for high-wind and larger offset antenna sizes is available. Single Tray - 30 lbs. ∙ Dual Tray - 55 lbs. Printable PDF ∙ Manual PTX-NPR200S PTX-NP238-200S ∙ PTX-NP238-200D PTX-NP300S ∙ PTX-NP300D $55.00 - $85.00

1.5m Ballast Chart
For PTX-NP300D

Elevation	Ballast Required (lbs)
(deg)	Wind Speed (mph)
	80	100	125
22	670	1168	N/A
40	522	911	N/A
60	301	525	876

4, 5-1/2, and 6-5/8 inch NPRM
Patriot ballast trays are designed to spread the load over a large area of the roof so as not to exceed typical roof load criteria. Most roof mount installations exert 6x less bearing load per square-foot than a person standing on the roof. *6-5/8 NPRM for use with 2.4m offset only. Pipe Sizes: 4 in (100mm) • 5-1/2 in (140mm) • 6-5/8 in (168mm) Additional Double and Triple Tray Options for high-wind and larger offset antenna sizes. Single Tray - 375 lbs ∙ Dual Tray - 575 lbs ∙ Triple Tray - 890 lbs Printable PDF ∙ Manual PTX-NP400S ∙ PTX-NP400D PTX-NP550S ∙ PTX-NP550D ∙ PTX-NP550T PTX-NP658D $465.00 - $875.00